PSA panacom PAN930SKHD, Инструкция по эксплуатации, Страница: 15 / 34

Start conversation
with Door Station
The visitor presses
the Call button on
Door Station 2
Note:
Note:
Note:
Door Station and Indoor
monitor can hear the ring
tone, default ring tone time
30s.
If the Monitor has a SD card installed, and if the
incoming call is not answered within 30seconds, the
Door Station will prompt he visitor with "Please leave
a message" & record a 30sec video before returning
to Standby. (The following Door Settings must first be
set:
If the call buttons of two or more door stations are
pressed at the same time, only the 1st Door station
will ring; whereas the other will not respond. Once
the monitor returns to standby mode, press the call
button again.
Record Mode: Video
Message (recording): ON
To unlock the lock while on a call, press button.
*
*
1. The conversation will automatically end 20seconds after an Unlock command is sent.
2. While ringing, a call can be cancelled by pressing and holding the door bell button for 5 seconds.
3.The monitor with the installed MicroSD Card will record the entire call. (Ensure its “Record
Mode” is set to “Video”)
4.The user can manually take a snapshot while talking to the Door Station, provided the monitor
has an installed MicroSD Card.
5. While in conversation, there will be text and voice prompts when Door Station 2 calls the
indoor monitor or triggers the alarm.
6.An incoming call from a Door Station will interrupt any local activity of a Monitor, and put
the monitor into Call mode.
The visitor presses
the Call button on
Door Station 1
Press the Talk
button on indoor
monitor
Press the Unlock
button on indoor
monitor
Press the Hang up button
on indoor monitor