PS Engineering
PMA450B Audio Selector Panel and Intercom System
Installation and Operator’s Manual
200-450-0600
Page 3-16
Rev. 5, August 2020
sage to finish playing before accessing the prior message, or cancel the current playback and step back-
ward. To cancel the playback, press and hold the COM receive playback button for two seconds (2). The
next time the button is pressed for one (1) second, the next earlier message will be heard. The playback will
stop whenever there is more incoming selected com audio, and the message can be replayed from the be-
ginning by pressing the selected Com Receive button again for 1 second.
Figure 3-8 Playback Controls
Figure 3-9 Playback Display
PS Streamer Operation (P/N 050-450-0601 & -0701 Only)
The PMA450B may be equipped with a PS Streamer audio module. In addition to a second music
Bluetooth input, this module provides a Bluetooth® output of selected signals from the audio panel.
These can be streamed to devices such as a GoPro 3 or 4, camera equipped with a SEMA GP10
adapter or other compatible devices.
NOTE: The Streamer function must be enabled (BT2 FCTN Streamer) in the
user setup
menu
for it to be appear in the operating menus.
3.15.1 Pairing
To pair the PMA450B PS Streamer with a compatible device, access the streamer menu from Ra-
dio-ICS
➔
More
➔
Streamer
➔
Config
➔
Init Pair. This will initiate the paring sequence, and you
may have to initiate the pairing on the other device as well.
