PS Engineering
PMA450B Audio Selector Panel and Intercom System
Installation and Operator’s Manual
200-450-0600
Page 3-8
Rev. 5, August 2020
Copilot as Passenger Enabled
3.8.3.4
Copilot as Passenger (CPAX).
In this mode, the copilot position is treated as a passenger. The position will have intercom with the pilot
position, except when there is radio traffic, will not hear any selected radio audio and cannot transmit on the
radio. The intercom microphone to the pilot position will not be heard while there is radio audio present.
The volume knob for the Copilot/Pax position changes in this mode. With CP Pax mode enabled, the copilot
seat is controlled via the passenger knob. Also, pressing the ICS button toggles between ISO and All
only
.
To activate Copilot as passenger, Radio-ICS
➔
Intercom: CPX.
flightmate®
The flightmate® is an audio storage system with four audio messages can be activated by external triggers,
and acknowledged if desired.
flightmate
MUST
be activated from the
installer setup
menu.
Contact your PS Engineerng installing dealer for information.
See §2.6 for important information.
When triggered, the recorded audio will play in the pilot’s headset.
Alert #1 has been designed aas a priority alert nd will continue to play until the trigger has cleared.
Alert 2, 3 and 4 can be stopped if the “Acknowledge” button is pushed while the audio is playng.
(Serial T45B2103 and up) Alert Messages 2 through 4 can be configured through the dealer setup function
to play once and stop, or continuously until the condition is removed or ACK pushed. Contact PS Engineering
for more information.
3.9.1
Storing Messages:
3.9.1.1
Storing Alerts
The PMA450B has four discrete messages that can be played when triggered by an external event. The audio
in these alerts can be changed in the user set-up menu by recordimg new messages with the pilot’s
microphone.
To access the user Setup - During the unit boot up process, press the lower line select button until the setup
screen appears.
Press
More
. . .
