4826 Sterling Drive, Boulder, CO 80301
PH: 720.406.8946 [email protected] www.psaudio.com
Quick Start Guide 3
®
Quick Start Guide
©2004 PS Audio International Inc. All rights reserved.
Owner’s Reference
GCPS High Current Power Supply
DO NOT plug the AC power cable of the GCP preamplifi er into the AC wall source. The AC power
input of the GCP-200 preamplifi er should remain disconnected.
Once the GCPS has been powered, turn the GCPS master power switch to the on position. Note the
blue light on the front panel of the GCPS, under the logo, should be lit. Your GCP-200 preamplifi er
should now be ready to play.
Turn your equipment back on. Make sure everything is powered up properly with the GCPS.
At this point you should be ready to enjoy the benefi ts of clean, isolated and low impedance DC power
to your preamplifi er..
Connect the
power
Master switch
Do not plug the
preamp back in