Prusa Research Original Prusa i3 MK2, Руководство пользователя

Страница: 4 / 47

Table of contents
About the author 3
2 Product details 6
3 Introduction 6
3.1 Glossary 6
3.2 Disclaimer 7
3.3 Safety instructions 7
3.4 Licenses 7
4 Original Prusa i3 MK2 printer 8
5 Original Prusa i3 MK2 printer kit 9
6 First steps 10
6.1 Printer unpacking and proper handling 10
6.2 Printer assembly 11
6.3 Setup before printing 11
6.3.1 Calibration flow 11
6.3.2 PEI print surface preparation 12
6.3.3 Increasing the adhesion 13
6.3.4 Selftest (kit only) 13
6.3.4.1 Selftest error messages and resolution (kit only) 14
6.3.5 Calibrate XYZ (kit only) 14
6.3.5.1 Calibrate XYZ error messages and resolution (kit only) 15
6.3.5.1 Y axis alignment (kit only) 18
6.3.6 Calibrate Z 18
6.3.7 Mesh bed levelling 19
6.3.8 Loading the filament into the extruder 20
6.3.8.1 Unloading the filament 21
6.3.9 First layer calibration (kit only) 21
6.3.9.1 Bed level correction (kit only) 22
6.3.10 Finetuning the first layer 22
6.3.10.1 Print prusa logo 22
6.3.10.2 Check probe height (kit only) 23
6.3.11 Securing of the probe (kit only) 23
7 Printing 24
7.1 Removing objects from the printer. 24
7.2 Printer Control 25
7.2.1 LCD screen 25
7.2.2 Print statistics 25
7.2.2 Silent vs. Hi­power mode 26
7.2.3 Factory reset 26
7.2.4 LCD layout 26
7.2.5 Print speed versus print quality 28
7.2.6 USB cable and Pronterface 28
7.3 Printer addons 30
7.3.1 Different nozzles 31