PRÜFTECHNIK VIB 5.300 EX Series, Руководство по эксплуатации

Страница: 66 / 172

3-12
VIBXPERT 11.2010
MEN
U
Measurement - Route
MENU functions in the measurement task selection screen
• Press the MENU key in the task selection screen (see below):
S
KIP
/ U
NSKIP
A measurement task can be skipped if it cannot be measured.
E
VENT
/ C
OMMENT
Enter the event and, if necessary, a supplementary comment to
explain the result. It is also possible to use this entry for skipped
measurements (see P. 3-26).
B
REAK DOWN
M
ULTITASK
Break down multi-measurement task (see previous section).
S
HOW
A
DAPTIVE
T
ASK
Adaptive measurement tasks contain additional measurement
tasks which are automatically carried out for diagnosis if a
threshold value is exceeded. This function shows these additional
diagnosis measurements.
T
ASK
M
ANAGER
To check the measurement settings before the measurement, call
up the Task Manager here. The settings cannot be changed.
D
ISPLAY RESULT
The results of a task that has already been carried out can be
displayed. Either the last result saved last or a trend appears (see
also the ‘Show result’ option in the Route Setup, p. 2-15).
D
ELETE RESULT
Delete the measurement result for the selected measurement task.
This procedure cannot be reversed!
S
ET UNMEASURED
Change the status of the measurement task to "unmeasured".
Existing results are retained.
MENU functions
in the task selection screen