background image

Zones

Heating and Cooling Stages

Rev F Jun 2015

Bypass Control

Optional Sensors

Panel Power

Warranty

Wiring

Humidity Rating

Temperature Ratings

Dampers per Zone

Compatible Equipment

Equipment Selection

The panel can be used with traditional mechanical barometric 
dampers or by adjusting the closed position limit on each zone 
damper.

Discharge air (Model TS2) and outdoor air temperature sensor 
(Model TS3 can be used. A pressure sensor (Model PS2) can be 
used to monitor duct pressure.

24VAC (18 to 30), 10VA

5-year warranty limited to repair or replacement of panel due to 
defective material or workmanship.

Use 18 or 20 AWG solid thermostat wire.

5 to 90% RH non-condensing.

Shipping

o

o

o

o

-20  to 150 F (-29  to 66 C)

o

o

o

o

0  to 165 F (-32  to 74 C)

Operating

Multiple dampers may be used to configure a zone.  The total 
number of dampers that can be used depends on the VA 
rating of the 24VAC transformer used.  Up to six dampers can 
be daisy chained to configure a zone.

All panels operate with gas/electric systems, conventional heat 
pumps and dual fuel heat pumps.

Selected using the PDMi3 plug-in programming/display 
module.  See table below.

See table below.

See table below.

HVAC

PANEL

ZONE DAMPERS

1

1

2

2

3

Fresh 

Air

3

 THERMOSTATS

Q

u

ic

V

ie

w

Zoning Panel

ProZone

7-5/8 (193)

9-5/8 (244)

1-5/8 (41)

Compatible Dampers

The ProR80J-XX dampers with plug and play cables.  Each 
damper is supplied with a 25-foot cable.  

Compatible Thermostats

Compatible Thermostat Types

When gas/electric equipment is selected, heat/cool thermostats 
are used in all zones.  When heat pump equipment is selected, 
a heat pump or heat/cool thermostat may be used in Zone1  
and heat/cool thermostats are used in all other zones. Wireless 
thermostats can be used with the optional plug in wireless 
radio, ISMR2

Single stage, 24VAC powered or battery powered thermostats. 
Or, wireless thermostats, Models T200WZ or T500WZ.

Zone

Pro

I n t e l l i g e n t  Z o n i n g

Installation Guide

ProC232J, ProC332J, ProC332JP  and ProC300JX

Zones on Panel

Two

No

Two

Two

Two

One

No

One

No

One

Yes

Two

Two

Two

Two

Two

Two

Yes. Up to 6 zones.

Yes. Up to 6 zones.

Three

Three

Model ProC232J

Model ProC332J

Model ProC332JP

Expandable

Heating Stages

Compressor Stages

Cooling Stages

Auxiliary Heating Stages

PDM Display on Panel

Gas/Electric Equipment

Heat Pump Equipment

Содержание ProC232J

















Отзывы: