- 12 -
Translation of the Original Operating Instructions
Operating Instructions Disc sander TSG 250/E
1
Introduction............................................... 12
2
Description of disc sander TSG 250/E
…12
3
Scope of delivery: ..................................... 13
4
Legend (Fig. 1) ......................................... 13
5
Technical data ........................................... 13
6
Commissioning the device ........................ 13
6.1 Setting up your disc sander: ..................... 13
6.2 Removing and attaching the sanding table
(Fig. 3): ..................................................... 13
6.3 Check and set angle display (Fig. 4):
……14
6.4 Setting the sanding table angle (Fig.
5): …14
6.5 Connecting the vacuum cleaner (Fig.
6):…14
7
Working with the disc sander
TSG 250/E: .............................................. 14
7.1 Notes on sanding speed ........................... 15
7.2 Working with the angle stop (Fig. 8):
……15
7.3 Adhering or replacing the sanding discs
(Fig. 9): ..................................................... 15
8
Accessories: ............................................. 16
9
Care and maintenance ............................. 16
10 Disposal ................................................... 16
11 CE Declaration of Conformity ................... 17
12 Spare parts list ......................................... 78
13 Exploded view .......................................... 79
1 Introduction
Dear Customer!
The use of these instructions
• makes it easier to become acquainted with the
device,
• prevents malfunctions due to improper han-
dling, and
• increases the service life of your device.
Always keep these instructions close to hand.
Only operate this device with exact knowledge
of it and comply with the instructions.
PROXXON will not be liable for the safe function
of the device for:
• handling that does not comply with the usual
intended use,
• other application uses that are not stated in
the instructions,
• disregard of the safety regulations,
You will not have any warranty claims for:
• operating errors,
• lack of maintenance.
For your safety, please comply with the
enclosed safety regulations without fail.
Only use original PROXXON spare parts.
All rights reserved for further developments
within the meaning of technical progress. We
wish you much success with the device.
2 Description of disc sander TSG 250/E
Thank you for choosing the disc sander TSG
250/E. You now have a precision instrument for
sanding long edges, end sections, radii, mitres,
or accurate flat surfaces at right angles and
many more things that require great exactness.
A high-precision manufactured and carefully
balanced sanding disc with dual ball-bearing
synchronous belt drive guarantees excellent
running smoothness, precise true run and low-
est wear.
Soft and hard woods, plates, non-ferrous metals
or steel, even plastic, cork, rubber and many
other materials can be machined at sanding
speeds of approx. 250-750 m/min (adjustable).
Installing the liquid cooling system accessory
(consisting of cooling container and coolant col-
lection tray) expands the range of machinable
materials even further: Sanding glass, stones or
tiles is thus no problem. The device is suitable
for wet sanding.
GB
