Proxxon SS 230, Руководство пользователя

Страница: 9 / 38

- 8 -
Key
1 Speed control knob
2 ON/OFF switch
3 Handle
4 Connection lead
5 Saw plate
6 Scale
7 Saw blade
8 Parallel stop
9 Piston with saw blade mount
Description of the machine
The PROXXON Super SS 230/E Jig Saw is the ideal
device for straight cuts and, above all, curved cuts in
wood (up to 12 mm), sheet metal (up to 5 mm) and
non-ferrous metals (up to 3 mm).
• Gearbox knob made from diecast aluminium
• Sliding foot for mitre cuts adjustable up to 45°
• Reduction gear and additional stroke rate control
Technical data
Dimensions, weight:
Length: 230 mm
Weight: 530 g
Motor:
Voltage: 230 volts, 50/60 Hz
Power rating: 100 watt
Noise emission:
≤
70 dB (A)
Accessories (included):
4 Supercut saw blades for wood, plastic and metal.
1 Allen key
(for changing saw blade)
1 Allen key
(for plate adjustment)
Operation
Danger!
Injury hazard
Safe and precise operation is only possible if the work
piece is securely fastened.
Clamping and changing saw blades
Danger!
Injury hazard
Disconnect the mains plug before changing tools.
1. Loosen clamp screw using the Allen key 1 provided
(Fig. 2).
2. Insert saw blade (2) into slot in the saw blade mount
and re-tighten clamp screw.
Important
The saw blade must be located in the groove of the
support roller.
Setting the mitre angle
Danger!
Injury hazard
Disconnect the mains plug before proceeding.
1. Loosen clamp screw using the Allen key 1 (Fig. 3).
2. Adjust the saw plate (2) to the desired mitre angle
and re-tighten the clamp screw.
Setting the parallel stop
Danger!
Injury hazard
Disconnect the mains plug before changing tools.
1. Loosen clamp screw 1 (Fig. 4) using the Allen key
provided
2. Adjust the stop (2) to the desired dimension and
re-tighten the clamp screw.
Note:
The stop can also be used for curved cuts. For this
purpose, position a nail at the centre point of the curve
and use as axis for the stop. The scale for curved cuts
is on the back of the stop.
Power consumption 100 Watt 10 min
Rotational speed 1000 - 4500 min -1
Vibration: < 2,5 m/s
2
Noise emission LPA 87 dB(A)
LWA 100 dB(A)
Accessories (included):
4 Supercut saw blades for wood, plastic and metal.
1 Allen key
(for changing saw blade)
1 Allen key
(for plate adjustment)