Boosted advices
Version 2.0
page 2 of 4
General
Read the instruction manual with all the security advices and warnings
before the initial use
of the units
in order to secure a safe and conventional use. Keep this document throughout the life time of the
machine to be able to refer to the instructions. In case of resale, pass it on with the unit.
Overview
All kardiomed® 530 units are available as a boosted version. Those units are equipped with special elements to make the
units even more robust. Besides that the units offer more comfort.
Unit
Max. user weight
Features
motion boosted cycle 800 fit/ med
200 kg
different elements to boost
motion boosted cross 800 fit/ med
200 kg
different elements to boost
motion boosted body 800 fit/ med
200 kg
different elements to boost
motion boosted relax 800 fit/ med
250 kg
Turnable seat, higher back rest, arm rest and different
elements to boost
motion boosted sprint 800 fit/ med
250 kg
different elements to boost
Maintenance
The required safety level can only be ensured by checking the unit regularly for damage and attrition. Damaged parts need
to get replaced right away and the unit needs to get decommissioned until its repair.
Check the unit visually before every use, but at least daily for damaged parts, loose connections and atypical noises.
Depending on the usage but the latest after six months the unit has to get inspected intensely. All connections and weld
seams need to get checked and the unit needs to get cleaned.
Clean the devices with mild purifier and a wet cloth to get off aggressive sweat. Dry the device afterwards.
The use of
spray bottles is not allowed; it has shown that the unit never dries at spots that can´t be reached easily, so that rust may
occur. Pay attention that no liquids run into the monitor as it could destroy parts of the electronic.
If disinfection is required only use
acryl-des® disinfection cloths (see
http://www.schuelke.com/
).
The monitor is showing a sign for low battery voltage when the functioning of the machine cannot be guaranteed without
electricity from the brake anymore. Exchange the 3AA batteries by loosening the monitor from the frame. Take out the
two screws on the back of the monitor and open it. Please pay attention that insert the new batteries the right way
around, note the signing. Dispose the batteries according to the provisions. There is a return obligation; the customer can
choose to give the batteries to the local disposer or to the distributor free of charge.
Only use original spare parts, therefore please contact us.
Warning: Retorque of cranks and pedals
After the first 10 hours in usage the cranks and pedals need to get retorquened.
If they do not get retightened, damage of the axis, pedals or cranks is possible and the warranty will not cover the
resulting damage.
