Proxomed 10120100, Руководство пользователя

Страница: 13 / 38

manual Page 12 of 37 version 01
Due to their small weight increment, the rope pulley can be used in all phases of therapy. The multiple
deflection of the compass® S1 wire rope pulley ensures an even finer weight grading. The weight is
changed by inserting the pin into the desired training weight on the weight stack.
The accompanying therapist should check the positioning of the patient before and during training.
3.3 compass® MTT S1 med. explosive Rope pull stand, Art. 10 10305100
The compass® S1 rope pull provides a wide range of training options for neuromuscular training within
the medical training therapy (MTT).
This device can be used to train the most varied muscle groups of the upper or lower extremities as well
as the stabilizing trunk muscles at different levels of movement. This makes it possible to train functional
movement sequences in the muscle chains from variable starting positions. The rope pulleys are used in
medical training therapy for shoulder, hip, knee and ankle joint rehabilitation as well as for stabilization
in spinal damage and injuries. In addition, a large number of coordination training exercises can be
carried out on wire rope hoists. A special deflection process using six rollers prevents the weight plates
from accelerating themselves during training. The resulting friction is minimized by the long rope path
and the low up and down movement of the weights. Depending on the patient's level of performance
and rehabilitation phase, this enables exercises with slow, controlled movement control as well as fast-
acting functional and technical training.
The optionally available training benches of the compass® series are particularly suitable for training in
a seated position.
Specific patient positioning
The positioning of the patient depends on the planned movement to be performed. The starting position
for the exercise can be in a standing, sitting or lying position, with the person being trained in the
respective positions facing the machine or to the side. Depending on the type of movement, the height
of the handles or foot straps attached to the carabiners on the front holding bar or other adapters can
be adapted.
It is possible to choose a low position, for example for lower limb exercises, and a high position, for
example for upper limb exercises. To adjust the clamping screw, loosen the locking bolt on the guide
rail handle and move the roller to the desired position. Then clamp again or let it snap into place. The
movable rope roll holders automatically adapt to the movement sequence.
It can be trained on one or both sides. Depending on the training goal, you can train in the abdominal,
supine, lateral, sitting or standing position.
Due to their small weight gradations, the rope pulley can be used in all phases of therapy. The multiple
deflection of the compass® S1 wire rope pulley ensures an even finer weight grading. The weight is
changed by inserting the pin into the desired training weight on the weight stack.
The accompanying therapist should check the positioning of the patient before and during training.
The stand device has castors as well as a holding possibility and can therefore be used variably, e.g. also
in combination with other training devices.