
3
Twist 304 - A430 / BE PTT en / A31008-M2501-E151-1-2M19 / Penguin.fm / 04.11.2014
Te
mpla
te Bali, V
e
rsion
1, 16.0
2
.2012
First steps
Check the package contents
Twist 304 Mono:
One handset, one Tw ist 304 base station, one mains adapter, one phone cord, two batteries, one bat-
tery cover, one user guide.
If you have purchased a
model with multiple handsets:
Two batteries, a battery cover and a charging cradle with mains
adapter for each additional handset.
Setting up the base station and charging cradle (if included)
The base station and charging cradle are designed for use in enclosed dry rooms with a temperature range of +5 °C to
+45 °C.
¤
Set up the base station at a central location on a flat, non-slip surface in your house or apartment. You can also
mount the base station and charging cradle on the wall.
The phone's feet do not usually leave any marks on surfaces. However, due to the multitude of different varnishes and
polishes used on today's furnishings, the occurrence of marks on the surfaces cannot be completely ruled out.
Care:
Wipe down the base station, the charging cradle and the handset with a
damp
cloth (no solvents) or an antistatic
cloth.
Never
use a dry cloth. This can cause static.
Please note:
◆
Never expose the telephone to the influence of heat sources, direct sunlight or other electrical devices.
◆
Protect your telephone from moisture, dust, corrosive liquids and vapours.
Connecting the base station
Connecting the charging cradle (if included)
Please note
Pay attention to the range of the base station. This is up to 300 m in unobstructed outdoor areas and up to 50 m
inside buildings.
¤
First
connect the mains adapter
1
.
¤
Then
connect the telephone jack
2
and insert the
cables into the cable ducts.
Please note:
◆
The mains adapter must always be connected, as the
phone will not operate without mains connection.
◆
Only use the mains adapter and phone cord supplied.
Pin connections on telephone cables can vary.
1
2
1
1
¤
Connect the flat plug from the power
supply
1
.
¤
Plug the mains adapter into the plug
socket
2
.
If you need to disconnect the plug from the
charging cradle, press the release button
3
and disconnect the plug
4
.
1
2
3
4