Proxima Nadir PX102, Руководство по эксплуатации

Страница: 7 / 27

5. SET-UP / CONFIGURATION
NOTE !
Access to these functions may be blocked. See SERVICE MODE..
5
Select program...
With the "Select program.."
screen being displayed on the
LCD, press CONFIG in the
programming section. LCD will
change to the following screen
and the CONFIG LED will light up.
Ch. Assign Mode
I ( 1 ) Fixtures
Special
fnctns
!! Clear all programs !!
Continue? Yes No
A B
NOTE !
Changing DMX address mode will erase all
programming. Choose appropriate mode
before doing any programming.
Ch. assign mode : model
32 fxtr x 16 channels
Using the encoder or buttons E or F select
desired mode.
E F
E F
MIDI CONFIG SHOWS SCENES
5.1. DMX ADDRESS MODE
Press A or B button.
Choose appropriate DMX address mode , according to the type of fixtures ( scanners ) used.
1 - 32 x 16 channels
2 - 32 x 8 channels + 16 x 16 channels
3 - 64 x 8 channels
4 - 32 x 4 channels + 16 x 8 ch 16 x 16 channels
ENTER
There are 4 DMX address modes.
Press ENTER button after choosing the desired mode. New
settings will be recorded in controller’s memory.