Using the Lightbook Projector
2-7
Setup
Setup
Press the
Setup
key to display a series of Setup menus. The projector will
display the slide bars in sequence to help you adjust the image. For example,
if you are connected to a computer source, the SETUP key will cycle through
slide bar adjusters for Contrast, Sync, and Image Position.
NOTE: If no video source is present, the Help screen will appear when you
press Setup.
Contrast
Contrast
Figure 2-10 Sample Setup slide bar
Press or to adjust the selected item. Press
Setup
again to accept the new
setting. The display disappears after five seconds if no actions are taken.
NOTE: The Setup options will be different for each type of input source.
SETTING
PURPOSE
AVAILABLE ON
Sync
Fine tune the clarity of the image.
Computer only
Contrast
Sharpen the image.
All sources
Brightness
Increase/decrease brightness.
Video
Image Position
Move the image left or right and up or
Computer,
down.
PAL/SECAM video in
full scale model with
Fit-To-View turned
off (see page 2-20)
Tint
Changes the color tones.
Video
Saturation
Increase/decrease color.
Video
Pixel Skip
Adjusts the image for text mode.
Computer Text
mode only