Downloaded from Projector.com
13
Shutting down the projector
./ 5 '!!0!#
0 0,' ./# / ! / ! / +
5 ./ '# / 0 0 '
01 0
C' / # 8' 1#/
/
Settings>System
' # $
./ 5 !/ /'!!/
!' 0 08' 0 !/
# $
./ 5 /
Power
10 /
/ 5 1 #/
Power
1#/, 0
C !/ /01 #/
Power
1 0
' ./ !'0/ *&21!# (' /! /
!/ !' / / !'/! 0/ *&2
!#/# 0/ %!#/ 1! / +
5 '! !
Troubleshooting your setup
'# !/ / 4
0 1! //
./ *&2/ 5 0 / / 5 0
/ !1! /
./ !!#1! /''1! ' ' ' /
1! !0 0 ./ !/ 0 / +
0 / / 1! '! 0/ 00!!
Table 1: LED behavior and meaning
LED color/behavior
Meaning
solid green
The projector is plugged in, or the
projector has been turned on and the
software has initialized. The projector
has been turned off and the fans have
stopped.
blinking green
The
Power
button has been pressed
and the software is initializing, or the
projector is powering down and the
fans are running to cool the lamp.
blinking red
Visit www.infocus.com/service for
more details on these LED error
codes.
A fan or lamp failure has occurred.
Make sure the vents aren’t blocked
(see page 22).Turn off the projector
and wait one minute, then turn the
projector on again. If the projector
has been working for 2000 hours or
more (page 31), replace the lamp and
reset the lamp timer. Contact Techin-
cal Support if the problem persists.
solid red
An unidentifiable error: please con-
tact Technical Support.
DP2000s-x manual.fm Page 13 Tuesday, August 27, 2002 9:56 AM
