Downloaded from Projector.com
23
BEFORE OPERATION
Remote Control Battery Installation
Using the Remote Control Unit
16.4'
(5 m)
60°
60°
Point the remote control toward the projector (Receiver window) when pressing the buttons. Maximum operating range for
the remote control is about 16.4' (5 m) and 60° front and rear of the projector.
16.4'
(5 m)
To insure safe operation, please observe the following precautions:
●
Use (2) AA, UM3 or R06 type alkaline batteries.
●
Change two batteries at the same time.
●
Do not use a new battery with a used battery.
●
Avoid contact with water.
●
Do not drop the remote control unit.
●
If batteries have leaked on the remote control, carefully wipe the case clean and load new
batteries.
USA
3
Replace the compartment lid.
1
Remove the battery
compartment lid.
2
Slide the batteries into the
compartment.
Note : For correct polarity (+ and -
terminal), be sure the battery
terminals are in contact with the
pins in the compartment.
