Page 1
Copyright © 007 Proxim Wireless
ceiling.Mounting
Follow these steps to mount the unit to a ceiling:
If the unit’s power supply is plugged in, unplug it.
Identify the location at which you intend to mount the unit.
Snap the rectangular tabs on the back of the mounting plate onto a ceiling
T-bar. You may need to slightly rotate the plate until it securely snaps onto
the T-bar.
Fasten the mounting plate to the ceiling tile with two screws through the
circular holes of the plate.
Position yourself so that the embossed letter “L” on the mounting plate is
facing up (see previous figure). Holding the 5012/5054-SUI so that the
connectors on the rear are facing to your left, align the two holes on the
bottom of the unit with the two tabs on the mounting plate. Press the unit
up so it is flushed with the plate.
Carefully slide the unit to your right until the tabs snap securely onto the
narrow holes of the unit. If the 5012/5054-SUI is mounted correctly no
portion of the mounting plate should protrude from any of the sides of the
unit.
1.
2.
3.
4.
5.
6.
