3.0 MOUNTING THE
ECU
AND
ANTENNA SENSOR
Thoroughly clean with alcohol or nitro solvent (be carefull not to use antiadhesive detergent) the
inner surface of the bumper of the zone previously identified (see Fig.1) on which will be applied the
antenna sensor and the central unit.
Starting from the zone where the central unit + harness will be fixed, start applying the adhesive
aluminum tape (antenna sensor) practicing a good pressure to make it well adhere to the inner
surface of the bumper *.
Fig. 3
Pag. 5
Bumper
Antenna sensor
Cable
Central unit (ECU)
