ProX BlitzzFX Operators Manual
Page 5
Version: 1.4 (9/6/2019 9:45 AM AD)
W-3 Wireless Controller
Wireless RF Controllers:
W-3 Controller Usage Instructions
：
#1 -
START
(Push to
Start
, Push #2 to
Stop
)
#2 -
STOP
(Manual Shut Down) -
Power Clean
AFTER WARMUP!
(Push and hold #2 for
more than 10 seconds to start clean cycle, it will run 15 seconds or Press #2 again to
stop
.
This ONLY removes granules in the spark tube, not storage tank!
#3 - Duration time 10s (the machine will run continuously 10 seconds)
#4 - Open group-1
（
wireless ADDR=1
）
(press down the button— turns on #2 to stop)
#5 - Duration time 20s (the machine will run continuously 20 seconds)
#6 - Open group-2
（
wireless ADDR=2
）
(press down the button—turns on #2 to stop)
#7 - Duration time 30s (the machine will run continuously 30 seconds)
#8 - Open group-3
（
wireless ADDR=3 (press down the button— turns on #2 to stop
W-3 Wireless Receiver
To clear granules from storage tank, allow machine to cool, then remove tank cap
and invert machine to shake granules out of tank. Store or dispose of properly!
W-3 Receiver /Dip Switch Usage Instructions
：
When the machine is ready to spark, the ready LED will glow.
There are 3 Channels (Dip 1-3) CAN SELECT for group-1, group-2, group-3
Instructions are printed on the back of the wireless controllers!
Wired Remote:
After pre-heating green light will turn on, Press the button once to start effects:
1. Ensure that the power outlet matches that of the required voltage for your machine.
Do not EVER remove or lift the grounding of the unit.
2. The unit should be used in a well-ventilated area. NEVER COVER THE FOUNTAIN PORT
WITH ANYTHING WHEN IN USE.
a. Before filling powder, you should turn off the power. If any consumables fall into the
interior of the unit, immediately disconnect the power cord.
b. The unit is not waterproof in any manner. If moisture or liquid enters the machine,
unplug the power cord and allow to dry.
c. Under no circumstances should you try to operate the BlitzzFX machines if you do not have the
appropriate qualifications and certification! It may result in personal injury or damage the unit.
d. Only for professional adult use, keep safe distance from spectators and/or guests
e. Keep away from flammable and explosive goods.
f. Maintain a clear, exclusionary, 3-foot radius around the machine when in use and a 10-foot radius
safety area. The fountain nozzle area temperature can become quite hot during operation, do not
touch this area during use or immediately following usage.
g. Allow time for cooling between bursts and after operation is complete.
h. If you experience excessive haze output, little spark, pump noise or no spark output at all,
Disconnect and discontinue use immediately. Check fluid level, powder, the external fuse, remote
connection and be sure the wall outlet is providing proper power. Only use our powder and the
machine can produce a perfect effect.
