CAUTION!
If any obstacles are situated between the remote control and the receiver
of the touchscreen, the remote control may not work properly.
10.3. Inserting the batteries
Before using the remote control for the first time, you must insert the two (1.5V AAA) batteries, supplied
with the remote control. Once the batteries are running out and the remote control is no longer working
properly, you must change the batteries. You can do this as follows:
1. Carefully remove the cover plate on the reverse side of the remote control.
2. Insert the two batteries (1.5V, AAA) into the remote control.
3. Place them with the positive and negative poles as indicated by the (+) and (-) signs in the battery
compartment.
4. Close the battery compartment again by carefully replacing the cover plate.
WARNING!
Remove any leaking batteries as quickly as possible from the remote
control. Thoroughly wash your hands afterwards. The leaking chemicals are toxic and
must never come into contact with the mouth, skin or eyes.
Manual
43
