Prowise All-in-One Lift, Инструкция по сборке

Страница: 5 / 6

Screw 2 bolts partially into
the upper holes of the
screen, leave about 5 mm
between the head and
screen. 1 2 3 4 Place the screen in the
predrilled holes of the
VESA bracket. Completely
screw the bolts with an
Allen wrench. Secure the two
remaining bolts
at the bottom
side, using an
Allen wrench. Mount the elevator
control at the back
of the screen, in a
place of your own
choice.
7
See back side for required tools
6
M13
10
mm
Secure the actuator with a flat head screw and
the nut (M8). Make use of a screwdriver
(10 mm) and a ring spanner (M13).
5
3 mm
Secure the hinge with a locking screw. Make use
of an Allen wrench (3 mm). Repeat this for the
other hinge.
1 x locking screw
2 x bolt M8x20
2 x bolt M8x20
1 x flat head screw
1 x nut (M8)
5
With a 55” touchscreen: please operate the
following intermediate steps. After step 2,
unscrew the upper bolts one at a time. Apply the
rings and screw the bolts back in their position.
Repeat this action for the bottom side.