Prowinch PWTR Series, Руководство пользователя и предупреждения о безопасности

Страница: 23 / 36

23
Maintenance Instructions
- The winch should be operated at least once a month.
- Replace remote control batteries every 12 months or when
exhausted.
- Keep protective cover in place when not in use.
- Lubricate all moving parts with grease and with normal use do
not need greasing for the life of the winch.
- Clean your winch after use, use only low pressure water and a
brush to rinse off any dirt.
- Once dry you should use a light spray oil to coat the winch and
wire rope before installing the winch cover.
- Winch should not be immersed in dirty water.
6.1 SYNTHETIC ROPE’S MAINTAINANCE
- Do not allow rope to contact sharp or abrasive objects.
- Do not expose to strong detergents, fuels, oils or anti-freeze solutions.
- After use; pull out rope, wash, dry and carefully re-spool onto drum.
6. MAINTENANCE INSTRUCTIONS
Check
Before first
operation
After each
use
Every 90 days
Read this user’s manual, in order to understand your winch and its
operation
x
Check fasteners and make sure they are tight and to proper torque.
Replace damaged fasteners.
x x x
Verify wiring to all components is correct and be certain that all
connections are tight.
x x
Verify there is no exposeed/ bare wiring or terminals. Cover expo-
sures with terminal boot, head shrink tubing or elecytrical tape.
x x
Inspect the wire rope for damage Replace it inmmediately if
damaged
x x x
Keep winch, rope and switch control free from contaminants, Use a
clean rag or towel to remove any dirt and debris.
x