iSCSI GbE to SAS/SATA II RAID Subsystem
30
User Manual
3.3 Quick Install
It is easy to use
“Quick install”
to create a volume. It uses all available physical disks
to create a RG; the system will calculate maximum spaces on RAID levels
0/1/3/5/6/0+1.
“Quick install”
will occupy all residual RG space for one VD, and it
has no space for snapshot and spare. If snapshot is needed, please create volumes
manually, and refer to Section 4.4 for more detail. If some physical disks are used in
other RGs,
“Quick install”
can not be run because the operation is valid only when all
physical disks in this system are free.
Step 1:
Click
“Quick install”
, then choose the RAID level. After choosing the RAID
level, then click “
”. It will link to another page.
Step 2:
Confirm page. Click
“
” if all setups are correct. Then a
VD will be created.
Done.
You can start to use the system now.
A RAID 0 Virtual disk with the VD name “QUICK16150”, named by the system itself,
with the total available volume size of 271GB.
