USB/IEEE 1394-to-SATA II RAID Subsystem
User Manual
19
2.3 Preparing the Subsystem and Powering On
Here are the steps to prepare the RAID subsystem for use.
1.
Connect the USB cable or IEEE 1394 cable from RAID subsystem to the USB
port or IEEE 1394 port on Host/Server. Insert the key token into the key token
port (if your RAID subsystem has Key Token).
NOTE: Only one host connection will work at one time. You
cannot use both USB and IEEE 1394 ports at the same time.
NOTE: The Key Token is optional. The RAID Subsystem can be
purchased with or without Key Token.
2.
Connect the power cable to the power input socket. Plug the other end of
power cord to the power source.
3.
Turn on the Power On/Off Switch.
Key Token
