USB/IEEE 1394-to-SATA II RAID Subsystem
User Manual
17
2.1.1 Installing the Rubber Feet
Four (4) rubber feet can be attached to the base of the unit to provide stable stand. The
following are the steps in installing the rubber feet:
1.
Prepare the four (4) rubber feet.
2.
Remove the rubber feet by pulling it outward.
3.
Attach the rubber feet on the base of the unit. The rubber feet can also be pasted
on the unit anywhere the user prefers, but must be evenly spaced so that the unit
will stand firm and stable.
