Error! AutoText entry not defined.
Error! AutoText entry not defined.
User Guide
29
¾
Channel Width
-
Determines the channel width to be used. It is unnecessary to change the
default value unless required.
¾
Max Tx Rate -
Specifies the maximum transmit rate of the device through this field.
¾
Enable Wireless Radio -
Select or deselect this check box to allow or deny wireless stations
to access the device.
¾
Enable SSID Broadcast
-
Select or deselect this check box to allow or deny the device to
broadcast its name (SSID) on the air. If it’s allowed, when wireless clients survey the local
area for wireless networks to associate with, they will detect the SSID broadcast by the
device.
¾
MAC of AP (1-4) -
Enter the MAC address of other AP(s).
Click the
Search
button to detect the SSIDs in the local area.
)
Note:
To apply any settings you have altered on the page, please click the
Save
button, and then you
will be reminded to reboot the device.
4.5.2 Wireless Security
Selecting
Wireless
>
Wireless Security
will enable you to configure wireless security for your
wireless network to protect your data from intruders. The AP provides three security types: WEP,
WPA/WPA2 and WPA-PSK/WPA2-PSK. Wireless security can be set on the following screen
shown as Figure 4-14. The security options are different for different operation mode.
