Error! AutoText entry not defined.
Error! AutoText entry not defined.
User Guide
22
1) Access
Point:
This mode allows wireless stations to access this device.
Figure 4-8 Wireless Settings in Access Point mode
¾
SSID
(Set Service Identifier)
-
Identifies your wireless network name. Create a name up to 32
characters and make sure all wireless points in the wireless network with the same SSID. The
default SSID is PROWARE_XXXXXX (XXXXXX indicates the last unique six characters of
each device’s MAC address). This value is case-sensitive. For example,
TEST
is NOT the
same as
test
.
¾
Channel
-
Determines the operating frequency to be used. It is not necessary to change the
wireless channel unless you notice interference problems with another nearby access point.
¾
Mode -
Select the desired wireless mode. The options are:
•
11b only -
Only 802.11b wireless stations can connect to the device.
•
11g only -
Only 802.11g wireless stations can connect to the device.
•
11n only -
Only 802.11n wireless stations can connect to the device.
•
11bg mixed -
Both 802.11b and 802.11g wireless stations can connect to the device.
•
11bgn mixed -
All 802.11b, 802.11g and 802.11n wireless stations can connect to the
device.
¾
Channel Width
-
Determines the channel width to be used. It is unnecessary to change the
default value unless required.
¾
Max Tx Rate -
Specifies the maximum transmit rate of the device through this field.
¾
Enable Wireless Radio -
Select or deselect this check box to allow or deny wireless stations
to access the device.
