Proware EP-4604D-G1S3, Руководство пользователя

Страница: 56 / 185

iSCSI GbE to SAS/SATA RAID Subsystem
56 User Manual
3.4 Connecting the iSCSI RAID Subsystem to the Network
To connect the iSCSI unit to the network, insert the network cable that came with the
unit into the network port (LAN1) at the back of iSCSI unit. Insert the other end into a
Gigabit BASE-T Ethernet connection on your network hub or switch. You may connect
the other network ports if needed.
For remote management of iSCSI RAID subsystem, use another network cable to
connect the R-Link port to your network.
3.5 Powering On
1. Plug in the power cords into the AC Power Input Socket located at the rear of the
subsystem.
NOTE: The subsystem is equipped with redundant, full range
power supplies with PFC (power factor correction). The system will
automatically select voltage.
2.
Turn on each Power On/Off Switch to power on the subsystem.
3. Push the main switch button in the front panel to power on.
4.
The Power LED on the front Panel will turn green.
Main Switch
AC Power Input Socket
Power On/Off Switch