5
6
PR
EP
A
RE
6
2. PRePARe sCReeN
TIP: The back of your screen is completely
flush with the metal edge. The front is
slight lower than the edge.
TIP: You can use a spray bottle to wet screen.
TIP: Run squeegee up and down back and
front of screen to remove excess water.
Spray the screen with water. It should be
completely wet, but not dripping.
Remove the emulsion sheet from the
black plastic bag in a dimly lit area.
TIP: There are two sides to the sheet, one
shiny and one dull. If you can’t tell which
is which, wet your fingers and touch the
corner. The sticky side is the dull side.
TIP: Center the emulsion on the screen. Do
not allow mesh to touch anything while
applying emulsion.
Apply the dull/sticky side to the back of
the wet screen.
Make sure the screen is clean and free of
dust, lint, and oil.
All screen preparation
mUsT
be done
on the back.
FRONT
CLEAN
BACK
DIRTY
3. APPlY emUlsION TO sCReeN:
