9
10
C
RE
ATE
8. PRINT sCReeN
Insert the first screen onto top lid (make
sure screen fits over registration posts,
front side up).
Before using platen, remove protective
sheet from platen adhesive sheet.
Apply generous bead of ink onto screen
just above design. Make sure bead of ink
is at least as wide as design.
Flood screen with ink by gently pulling
squeegee across design.
9
Mount t-shirt or other material on
platen. Open lid and place platen on
platen posts. Close lid.
TIP: Tape the back of the screen around
edges to seal any open screen areas.
TIP: Use Yudu Blockout (sold separately)
or small pieces of tape to fill any holes,
scratches, and registration marks in emulsion.
TIP: When adhesive sheet is no longer
sticky, peel off and replace. (Adhesive
sheets sold separately. )
TIP: For large open areas of design,
you may find it necessary to be more
generous with ink.
TIP: Hold lid up at a slight angle while
flooding screen. Make sure material is not
touching the screen before you flood image.
TIP: Material should be completely
adhered to platen with platen adhesive
sheets to keep material from shifting.
