Provision DVR-906M, Системное руководство

Страница: 71 / 73

TROUBLESHOOTING
PRO-VISION
®
Video Systems
DVR-906M SYSTEM GUIDE
69 provisionusa.com
Able to connect to the Wi-Fi but
cannot access the DVR.
The device is configured with and
incorrect static IP. Ensure that the network settings of the devices
Wi-Fi are set to DHCP rather than static IP.
The web path was entered incorrectly.
Ensure the web address of 192.168.10.254 was
entered.
The DVR’s Wi-Fi AP has DHCP
disabled.
Enter a static IPv4 address of 192.168.10.100
mask of 255.255.255.0 and then connect to the
DVR and go to the Wi-Fi settings and re-enable
DHCP.
DVR’s Wi-Fi Client will not find the
buildings Wi-Fi.
The buildings Wi-Fi is out of range of
the DVR. Relocate the vehicle, reposition the antennas on
the building and/or the vehicle.
The buildings Wi-Fi is using an
unsupported name format. Ensure the buildings Wi-Fi SSID name is not
using spaces or special characters.
DVR’s Wi-Fi Client will not connect
the buildings Wi-Fi.
The signal strength is poor of the
building’s Wi-Fi AP. Relocate the vehicle, reposition the antennas on
the building and/or the vehicle.
The security key was incorrectly
entered. Find the Wi-Fi AP again and reenter the security
key.
The security mode of the buildings
Wi-Fi AP is not compatible with the
DVR.
Change the security mode of the buildings Wi-Fi
AP.
DVR Status Lights:
LED Light Indication Description
STATUS
(RED/GREEN
LED)
- DVR
- Event Button
OFF No power to DVR, or no power to Event Button.
FLASHING GREEN DVR is booting up, or is booted up but not set to record.
ON SOLID GREEN DVR is recording, DVR is working properly.
FLASHING RED DVR cannot record, SD card issue, camera issue.
4G
(AMBER LED)
OFF No power to DVR, no 4G modem, 4G is disabled, or 4G has not yet booted.
ON SOLID 4G is connected and available for data transfer.
FLASHING 4G is connected and transferring data to/from DVR.
PWR
(GREEN LED)
OFF No power to DVR.
ON SOLID Ignition Accessory Signal Detected and DVR is booting/booted.
FLASHING System has no ignition signal and is in a standby/delayed shutoff state.
RUN
(GREEN LED)
OFF No power to DVR.
ON SOLID System error state, unplug then reconnect power to reset.
FLASHING Delayed shutoff if flashing with PWR, standby if flashing opposite PWR.
Wi-Fi
(AMBER LED)
OFF No power to DVR, Wi-Fi is disabled or not yet booted.
ON SOLID Wi-Fi is running and ready for connection(s).
FLASHING Wi-Fi is connected and transferring data to/from DVR.
SYS
(AMBER LED)
OFF No power to DVR, system not yet booted.
ON SOLID System Processor is running and ready for operation.
FLASHING System Processor is in operation.
SD
(RED LED)
OFF No power to DVR, No SD Card Inserted, SD Card is not detected.
ON SOLID SD Card has been detected and loaded by DVR.
FLASHING SD Card has been loaded and transferring data to/from DVR.
SSD
(RED LED)
OFF No power to DVR, No SSD inserted, SSD is not detected.
ON SOLID SSD has been detected and loaded by DVR.
FLASHING SSD has been loaded and transferring data to/from DVR.