4. Front Panel
①〜⑥
PGM1/L1 Switch〜PGM6/L6 Switch
These switches recall the settings stored in the corresponding program (1 ~ 6) when pressed in PGM mode. They
directly turn loops 1 ~ 6 on or off when pressed in DIRECT mode.
⑦
PGM7/L8/ENTER Switch
Recalls the settings stored in program 7 when pressed in PGM mode.
Turns LOOP 8 on or off when pressed in DIRECT mode.
Functions as an “ENTER” switch in the EDIT mode.
⑧
BANK↑/L7/INC＋ Switch
In the PGM mode this switch will increment the bank number (the two leftmost display digits) each time it is pressed.
When the bank number is changed the display will flash and no change will actually occur until a program number is
selected via the PGM1 ~ PGM7 switches.
Turns LOOP 7 on or off when pressed in the DIRECT mode.
Increments the selected parameter in the EDIT mode.
⑨
BANK↓/STORE/DEC−Switch
In the PGM mode this switch will decrement the bank number (the two leftmost display digits) each time it is pressed.
When the bank number is changed the display will flash and no change will actually occur until a program number is
selected via the PGM1 ~ PGM7 switches.
Stores the current setup in the select program in the DIRECT mode.
Decrements the selected parameter in the EDIT mode.
⑩
MUTE Switch
When this switch is engaged and the MUTE LED is flashing a mute circuit located between LOOP 5 and the OUT-1 and
OUT-2 jacks is activated so that output from the PEC-2 is muted.
⑪
MODE/EDIT・EXIT Switch
This switch alternately selects the program (PGM) and direct access (DIRECT) modes. When held for longer than 3 sec-
onds it selects the EDIT mode. When the EDIT mode is selected the display will flash and the edit menu will appear.
Press this switch a second time to exit from the EDIT mode.
⑫
Display
Displays the selected bank and program number. The two leftmost digits display bank numbers “00” through “11” (12
banks). The rightmost digit displays the program number (1 ~ 7).
In the EDIT mode this display also shows the currently selected edit item and parameter.
⑬
MIDI Receive/Transmit LED
This LED dot will light when the PEC-2 is receiving or transmitting MIDI data.
⑭
M.PROTECT（Memory Protect）LED
This LED dot will light when the memory protect function is turned on via the EDIT mode.
⑮
Status Change LED
In the DIRECT mode this LED dot will light whenever the loop settings differ from the settings in the currently selected
program number (e.g. when a loop is directly switched on or off).
⑯
Loop On/Off LEDs
These LEDs indicate the current status of loops L1 ~ L8. These LEDs light when the corresponding loop is on.
5
