PROUSER 18147, Руководство пользователя

Страница: 6 / 52

6
12V DC OUTPUT :
Press this button during standby mode (blink of “000”); the 12V output socket on back of
the charger is powered on. Press this button again, the socket stops power supply and the
charger is switched to standby mode.
LED INDICATORS:
AMP: This light is on while charging and 12V output working.
VOLT: This light is on while battery voltage is selected during charging
and standby mode
6V, 12V, 24V: Shows the charging voltage selected.
WET, AGM, GEL: Shows the battery type selected.
DISCONNECTING THE BATTERY
When the display shows “FUL”, the battery is completely charged and you can disconnect
the charger in the following steps
1. Please disconnect the NFC1800 from AC Power.
2. First disconnect the negative charging lead (black) from the negative terminal post
of the battery (marked N or -) or the vehicle frame.
3. After that please disconnect the positive charging lead (red) from the positive
terminal post of the battery (marked P or +).
4. Replace the caps onto the battery to close the open compartments and to secure
the posts on the battery.