Watching Television and Listening to the Radio
24
Setting up the FM Radio Tuner
The signal input for the FM radio tuner is located on the left side of the player and labeled
TUNER.
To connect an FM radio signal:
1. Connect the included antenna to the TUNER
input.
2. Switch the signal source to FM using the
DVD/TV/
FM
button on the remote.
3. Press the
SEARCH
button on the remote to scan for
radio stations. This will set the first 30 stations
found as presets.
You are now ready to listen to the radio on your
player.
Listening to FM Radio
Once you have connected the FM radio signal and configured the player, you can listen to the
radio on the player.
To listen to the radio:
1. Ensure a signal source is connected and configured, as above.
2. Switch the signal source to FM using the
DVD/TV/FM
button on the remote or the
MODE
button on the player.
3. Use the
CH–
and
CH+
buttons to cycle through the presets.
Use the and buttons to scan for radio stations, ignoring the presets.
Use the and buttons to adjust the reception frequency by 0.1MHz.
OMTPLC01.book Page 24 Thursday, September 15, 2005 10:19 AM
