Protoz PT 33012, Руководство пользователя

Страница: 8 / 32

GETTING STARTED
BATTERY MANAGEMENT AND CHARGING
●
Please make sure that the device battery is fully charged upon first usage.
●
Just plug the charger into DC interface for charging.
●
Charge for about 6 hours during the first two times of use and then for around
4 hours thereafter.
NOTE
:
This item was featured with built-in polymer battery, the charger should
be comply with the specification of Input: AC100-240V, 50/60Hz, Max: 0.3A.
Output: DC5V/2A.
●
The battery icon will scroll during charging.
●
Screen battery icon will turn green and stop scrolling when charging is
completed.
●
To extend the battery life, it is suggested to run the device out of power for the
first two times of use.
NOTE
:
If the device is not used for a long time, make sure it is charged once a
month to avoid excessive consumption.
●
Upon low power shutdown, plug the charger to start charging, the device will
display the menu once there is enough power.
●
It is better to charge in standby mode otherwise the charging time will be
longer as the screen consumes battery power during charging.
6
Guide 3G-new edits-1:Layout 1 12/19/13 8:18 AM Page 8