Protouch prowarm ProTouch V2, Инструкция по эксплуатации

Страница: 10 / 16

5. Advanced Settings
The thermostat provides advanced settings to suit various special situations. These are normally set by
technicians during initial installation.
Steps:
Press Advanced Setting to enter the page of warning.
Press to enter advanced settings.
Press or to switch feature number.
Press the feature to change its parameters.
1. Room Temperature calibration: Calibrate the temperature detected by room sensor.
2. Floor Temperature calibration: Calibrate the temperature detected by floor sensor.
3&4. Frost mode function: If frost mode is on this will protect the property or room from frost.
5. Floor temperature limit: When choose both sensors, you can set the maximum floor temperature value,
system will stop heating if the floor temperature exceed this value.
ADVANCED SETTING
Period parameter table (Default)
Mon - Fri 07:00 22
삸
08:30 19
삸
08:30 22
삸
17:00 22
삸
22:00 19
삸
22:00 19
삸
17:00 22
삸 08:00 22
삸
Sat - Sun
Day Wake Leave Return Sleep