23
Bottom clamp
Adjust a bottom clamp as follows:
Tighten the clamp
(20)
until an audible click is heard and the knob is in the locked position
(
POSITION 1
).
Using a suitable instrument, such as a flat-bladed screwdriver, carefully remove the knob
cap
(20.8)
.
Remove the retaining screw
(20.7)
and washer
(20.6)
, and pull off the clamp knob
(20)
.
Examine the shaft
(20.3)
. If there is an identifying groove
(20.4)
on the shaft, proceed as
follows. Otherwise, consult
protouch Pro-10 System - Maintenance Manual (Publica-
tion Part No. 3809-9)
or contact your local Vinten dealer.
Replace the clamp knob
(20)
and turn it to
POSITION 2
.
Using a 2.5 mm hexagonal wrench, slacken the grubscrew
(20.5)
until the leg is free to
move under its own weight.
With the knob still in
POSITION 2
, slide the leg in and out and gradually tighten the grub-
screw
(20.5)
until the clamp begins to grip.
Back off the grubscrew
(20.5)
by a quarter-turn (90°).
Secure the clamp knob
(20)
with the washer
(20.6)
and retaining screw
(20.7)
. Refit the
knob cap
(20.8)
.
Bottom
clamp adjustment
(20.3)
(20.4)
(20)
(20.6)
(20.7)
(20.8)
(20.5)
P
O
S
IT
IO
N
2
POSITION 1
90°
(20.3)
(20)
Содержание protouch Pro-10 system
Страница 1: ...Vinten Camera Control Solutions Operators Guide PRO 10 System ...
Страница 6: ...6 Pro 10 Pan and Tilt Head 1 2 3 4 6 5 7 8 9 10 11 12 13 14 16 17 18 15 ...
Страница 8: ...8 Pozi Loc Tripod and Spreader 19 20 21 22 24 23 25 26 ...
Страница 12: ...12 Each arm is of the spreader is adjustable for length 22 and the tripod feet are secured by rubber straps 23 ...
