Protouch protouch Pro-10 system, Руководство оператора

Страница: 16 / 25

16
Push a blind captive nut (27.4) into the hole in the lower moulding.
Using a suitable M5 screw, fully compress the blind captive nut. Remove the M5 screw.
Install a washer (27.3) on the lower strap anchor (27.2) and screw into the captive nut
(27.4) . Ensure that the hole in the strap anchor is oriented so that the karabiner (27.1) can
be attached
On the underside of the tripod bowl (19) , remove and discard the screw (27.5) securing the
corresponding leg clamp (19.2) . Do not remove the washer (19.1) .
Position the bowl strap anchor (27.6) on the leg clamp, ensuring it is correctly oriented. Us-
ing Loctite 221, secure the bowl strap anchor with the 25 mm M6 screw (27.5) supplied with
the strap. Tighten screw to a torque of 4.5 Nm (40 lbf in.).
Using the karabiners (27.1) , clip the strap (27) to the strap anchors and adjust to length.
'Spread-Loc' mid-level spreader
The ‘Spread-Loc’ mid-level spreader (28) is available as an optional accessory. To install the
spreader:
Grip the ends of each spreader arm in turn between thumb and fore-finger and press in the
attachment release buttons
(28.1) .
Push the arm into the tripod attachment (25) until the release engages.
Fit the carpet feet (29) .
To remove the spreader, press in the attachment release buttons (28.1) and free each arm
in turn.
'Spread-Loc' mid-level spreader
(29)
(25)
(28) (28.1)