Protocol AEROFLUX AP, Инструкция по эксплуатации

Страница: 7 / 11

OPERATION: FLYING THE DRONE
Pull the throttle left or right,
the drone turns to the left or right.
STARTING THE ENGINE; ENGINE IDLE
1. After synchronizing the drone, press the engine start button to go into
Idle mode. The blades will rotate but the drone will not lift.
TAKE–OFF:
1. Press the take off button, release, and the drone will lift off and over a
few feet off the ground. Then gently advance the throttle to a desired
height and release. The drone will hover at that height.
OR
2. From Idle mode, gently advance the throttle up to a desired height and
release. The drone will hover at that height.
LANDING:
1. Press the landing button to lower the drone to the ground.
OR
2. Push down on the throttle until the drone is on the ground.
Push the direction lever up or down,
the drone flies forward or backward.
Pull the direction lever to the left or right,
the drone banks to the left or right.
8
9
FIRST TIME FLYERS!!! TAKE YOUR TIME! GO SLOW!
Practice hovering until you are comfortable with flight before attempting
any other maneuvers. Make small movements letting the stick return to
the center. If you start to lose control, don’t panic. Just press land.
OPERATION: FLYING THE DRONE
UP
DOWN
BACKWARD
FORWARD
LEFT MOVEMENT RIGHT MOVEMENT
LEFT ROTATION RIGHT ROTATION
NOTE:
- Emergency Shut Off: When in flight, press the Engine
Stop Button and the drone will shut off.
* The drone may drift a bit, especially in the first 30 seconds until the
altitude sensor gets a good fix on the position. Some drift is normal.