Protex PRX-MG04 Series, Руководство пользователя

Страница: 79 / 138

79
Alarm input 2 can activate channel 2/3/4/5/6/7/8
Alarm input 1 and alarm input 2 activate video output 1.
So, when there is alarm from channel 1, video output 1 becomes valid. If there is no
alarm from alarm input 2 during the same period, then video output 1 can tour
between channel1/2/3/4/5/6.
When video output 1 goes to channel 3 and there is alarm form channel2, then video
output 1 tour between 4/5/6/7/8/2.
The general principles are:
When alarm activate, each valid channel alarm input can activate a complete
tour between activation channels.
When there are several alarm inputs in the same video matrix output, system
video matrix can activate all the channels in the setup.
If system has toured some activation channels, then corresponding alarm
activation channels are null.
Figure 5-42
5.5.8.6.3 Motion Detection (including video loss and camera masking)
Motion detection principle is the same as alarm. You can set in motion detection
interface (Main menu->Setting->Detect). See Figure 5-43.
In detect interface, you can set the activation channel. You can enable video matrix
function if you want to set matrix function, and then set video matrix output channel.
Once the activation occurs, system continues scheduled matrix tour after motion
detection tour completes. If there is no scheduled tour available, the matrix will stop
at the last activation channel after alarm completes
Select alarm input channel
Highlighted here
Highlighted here
Corresponding to video out put in
Figure 5-41 .