a
b
c
d
e
f
g
h
CONTENT OF THE IDENTITY LABEL
a) Device type.
b) Model symbol.
c) Reference number.
d) Equipment only for lifting loads - notice.
e) Month and year of manufacture.
f) Serial number of the tripod.
g) Caution: read the manual.
h) Marking of the manufacturer or distributor of the tripod.
TRANSPORT
Device should be transported in packaging protecting it from damage or getting wet, e.g. bags made of impregnated fabric or in
steel / plastic / waterproof wooden cases or boxes.
MAINTENANCE AND STORAGE
When using the device, protect it against mechanical, chemical and thermal damage. Do not use a damaged or malfunctioning
device. Clean a dirty device with a damp cloth. Store the device indoors, away from moisture and sources of heat.
THE ESSENTIAL SAFETY RULES AND ESSENTIAL PRINCIPLES OF USE
- Device is used for lifting and lowering loads weighing up to 500 kg.
- This is not an emergency device for lifting people and it should not be used for this purpose.
- Do not use device contrary to its intended use.
- Do not lift loads over an area occupied by people.
- Do not change the device design, repair or replaceable elements included in the kit.
- Before each use of the device, carry out thorough inspection to check the device condition and proper operation. Carefully
check all elements, paying particular attention to any damage, excessive wear, corrosion, abrasion, cuts and malfunction.
- At least once a year, after 12 months of use the device should be withdrawn from use for a detailed interim inspection. The
inspection can be carried out by the person responsible in the workplace for the interim inspections of the protective equipment
and trained for this purpose. Periodic inspections can also be carried out by the equipment manufacturer or a person or a
company authorized by the manufacturer.
- Device must be immediately withdrawn from use if there is any doubt about the condition of the device or its operation. The
device may be readmitted for use only after a manufacturer's detailed inspection, and manufacturer's written consent for its use.
- Check the stability of the load attached to the cable, on which it is hoisted, to prevent accidental detachment of any of the
elements.
- The use of the this device with other devices (such as devices for lifting and lowering loads) must be in accordance with the
instruction for use of these devices.
- It is forbidden to use the kits in which the device is included, in which the operation of any component disrupts the operation of
other components.
- In case of any doubts as to the condition and usage of the device, please contact the manufacturer.
6/7
