Protekt AT-014-2, Инструкция по эксплуатации, Страница: 4 / 24

4/24
Components installed on the beam are transported
separately in the box.
SECTION 2 - DEVICE INSTALLATION
IT IS RECOMMENDED THAT THE DEVICE SHOULD BE TRANSPORTED AND INSTALLED BY MINIMUM TWO PEOPLE!
T-lock Trolley "A"
T-Lock
Trolley "B"
with AZ011
connector
T-Lock
Retaining bolt
Retaining bolt
INSTALLING TM 12-2 BEAM COMPONENTS
During transportation all components (trolley's and t-lock's) mounted on the beam, are transported separately in the box.
Proper installation of all components shown in the figures below.
LIST OF COMPONENTS:
a) Trolley "A" - 1 pcs.
b) Trolley "B" with AZ011 connector - 1 pcs.
c) T-lock - 3 pcs.
d) Retaining bolts + nuts - 2 pcs.
INSTRUCTION:
1) Remove retaining bolt at the end of the beam.
2) Install all of the items from "List of components"
3) Secure firmly end of the beam with retaining bolt.
4) Check the ends of the beam - they MUST BE FIRMLY secured with retaining bolts (M12x80, galvanized steel bolts).
WORKING LOAD LIMIT
: 1000 KG