Protekt AT-014-2, Инструкция по эксплуатации, Страница: 18 / 24

18/24
Main Tripod lateral
attachment point
Trolley "A"
detent pin
Trolley "A"
locked in one of available
working positions.
T-lock for
Trolley "A"
support
Trolley "A"
detent pin
Rope pulley #1
Rope pulley #2
Trolley "A"
T-lock
Trolley "A"
locking holes
CRW 300
AT 172
Rope
ALWAYS USE Trolley "A" detent pin
for lock Trolley "A" position during lifting loads
INSTALLING CRW 300 RESCUE LIFTING DEVICE TO THE TM 12-2 HEXAPOD FULL SET
The TM 12-2 hexapod full set can be used with CRW 300 rescue lifting device / retractable type fall arrester. CRW 300 should be installed on the main tripod reinforced leg. CRW 300 with
fixing adapter AT 172 should be fastened on the locking hole situated on the outer wall of the reinforced leg. Rupe pulley #1 should be attached to the Main Tripod Lateral Attachment
Point using connector. Rupe pulley #2 should be attached to the Trolley "A" with connector. Working rope should pass through the pulleys #1 and #2 wheels. Position of the Trolley "A"
should be secured with Trolley "A" detent pin installed in one of Trolley "A" locking holes and back of the Trolley "A" should be support by T-lock. For proper and safe installation and use of
the CRW 300 please refer its manual.