3
Filter Replacement:
1.
Press the release tab (arrowed in Fig 3) to
unlock the filter.
2.
Unscrew the filter plastic body and discard.
3.
Screw new filter into the T/A/LINE body
and check that filter warning is visible and
the release tab is refastened.
Note:
The filter and bonded seal must be
replaced annually.
Fig. 3
Waist Belt Replacement:
Undo the adjustable buckle tag and slip the belt through the slots. Fit new belt through the
slots and reattach the adjustable buckle tag.
Flow Test:
Perform flow test as detailed in the Operating section. If the unit fails the flow test, use medium
pressure gauge (Part No. 035.147.02) to check that the pressure at the wearer end of the
airline is between 2.5 bar (35 psi) and 7.0 bar (98 psi). There is a flow tester for airlines in the
range.
Service and clean the headtop as described in the appropriate User Instruction leaflet.
SPARES
The following spares are available for
T/A/LINE
. Bracketed numbers show quantity of items.
DESCRIPTION
Part No.
Filter with bonded seal (1 of each)
T/AL/FILTER
Bonded seal, filter (5)
054.010.99
Waist belt (1)
ECWB
Flow tester
T/FLOWTEST
ACCESSORIES
The following accessories are available for
T/A/LINE .
Bracketed numbers show quantity of
items.
DESCRIPTION
Part No.
Adapter, CEN socket to lnstantair plug (1)
035.147.00
Medium pressure gauge with CEN couplings (1)
035.147.02
CEN socket, 1/4" BSP male connector (1)
021.041.99
Airline hose, 3 metres, PVC, CEN couplings
HOSE PVC 3M
Airline hose, 10 metres, PVC, CEN couplings
HOSE PVC 1OM
Airline hose, 3 metres, anti-static, CEN couplings
HOSE-AS-3M
Airline hose, 10 metres, anti-static, CEN couplings
HOSE-AS-10M
All hoses are approved to prEN1835
Notified Body
I
nspec Certification Ltd (Number 0194),
Upper Wingbury Coutryard, Wingrave
Aylesbury, Buckinghamshire, HP22 4LW
UK
