Warning
Environment Friendly Disposal
• The compressor should be used in a clean, dry and ventilated area.
• Please do not wash the machine body under water.
• Keep out of reach of children.
• The compressor’s ambient temperature should be 0-40ºC. Do not put in direct
sunlight.
• Please do not disassemble or modify this product by yourself to avoid failure.
• Please avoid dropping or hitting the product to avoid malfunction.
• Use the device for the purpose it was developed for only and in the manner
specified in these instructions for use. Any form of improper use can be
dangerous. The manufacturer is not liable for damage resulting from
improper or incorrect use.
• You can help protect the environment!
• Please remember to respect the local regulations: hand in the non-working
electrical equipment to an appropriate waste disposal center.
Common Faults and Solutions
04
Parts Name
AIRBRUSH MECHANISM
PARTS DETAILS
1.Needle Cap
2.Nezzle cap
3.Nozzle
4.O-Ring for Nozzle Cap
5.Nccdle
6.O-Ring for Needle Guide
7.Nezzle Guide
8.Lid for Color Cup
9.Operation Lever
10.Lever Guide
11.Stopper
12.Needle Chuking Guide
13.Spring
14.Spring Case
15.Nccdle Chucking Net
16.Standdard-Handlc Adjusting
17.Adiustin Screw
18.Guide Screw
19.Lever Guide O-Ring
Analysis
Bad button bad
plug
Internal
damage
Blockage
Contact seller
Clean the
needle and gun
The needle
(NO.5)
is stuck
Pull out the
needle and re-
assemble it
The nut is not
tightened
Tighten the nut
(No. 15)
Contact seller
Distributed by:
Electus Distribution Pty Ltd
46 Eastern Creek Dr,
Eastern Creek NSW 2766
Australia
Ph 1300 738 555
Int’l +61 2 8832 3200
Fax 1300 738 500
www.electusdistribution.com.au
