Cleaning and Maintenance
3
Empty the fluid cup and wash with water or solvent by a brush.
Refill up with water or solvent, then block the needle cover with a finger and
spray. The air flows backward into nozzle to clean the paints remained.
Empty any remaining airbrush
coloring from the cup.
Using the dropper
,
add hot water or
alcohol to the cup to clean.
Thoroughly swab the cup clean
with a cotton swab
.
Add more
water and repeat if necessary.
Spray water or alcohol through the
airbrush onto a towel until it
sprays clear. Discard any leftover
water and dry it off.
A: Cleaning step
B: Maintenance
Step 1:
Step 2:
Step 3:
Step 4:
Common Faults and Solutions
When plug in, power
light is off, air pump has
no airflow
The power light is on,
and the air pump has no
airflow
Airbrush with air flow
but no mist
