Protec TC-512A, Инструкция по установке, эксплуатации и обслуживанию

Страница: 7 / 26

7-26
Use proper protection tools to unpack (gloves etc)
Check that the equipment is in perfect condition, making sure that no parts are
damaged or missing, if in doubt do not use the machine and contact your retailer.
Put the packing materials (plates, nails, screws, plastic bags) in safety place.
6. Installation.
1). Space Required
When choosing the place of installation is sure that it complies with current safety at
work regulations.
This machine must be connected to the mains electric power supply and the
compressed air system. It is therefore advisable to install the machine near these
power sources.
The place of installation must also provide at least the space shown in figure below
so as to allow all parts of the machine to operate correctly and without any restriction.
If this machine is installed outside it must be protected by a lean-to.
2). Commission