６
NOTICE:
Do not exceed maximum oil extraction temperature 60
℃
.
Hold the hose protection sheath during extraction to avoid scald
Place the machine in a flat ground to avoid sliding under working condition
Oil temperature higher than 80
℃
will cause seriously damage to the components, in worst case it
could lead to machine failure.
3) Oil Ejection
Oil ejection from cylinder to oil tank
1. When the oil level reached cylinder ‘STOP’ warning line, please empty
the cylinder with oil ejection.
2. Turn on ball extraction valve(Part No.32HC-1005)
，
at the same time
turn on mini ball valve(Part No.32HC-0803) from the hose to release
cylinder pressure and oil drain into the oil tank.
3.
Turn off oil extraction valve(Part No.32HC-1005) and hose ball
valve(Part No.32HC-1703) after completion of oil ejection.
4) Oil Collection
1.Lift the vehicle to proper height
2.Move the oil extractor below the car engine, oil tray position right
under the vehicle oil drain hole.
FIG.5
FIG.6
FIG.2
FIG.3
FIG.4