５
b) One Complete Measuring Glass/Cylinder
c) One Oil Collecting Bowl/tray
d) One Strain
e) Probes 6 pcs with sleeve
f)
User’s Manual
Operation Instruction
1) Vacuum Generation with Cylinder
1. Operating air pressure: 6
～
8bar/ 87
～
116PSI.
2. Make sure all valves are close. (FIG.1)connect air source with air inlet(Part No.32HC-0801) , turn on air
valve for vacuum extraction, When finger reaching to the MAX area on the vacuum gauge, turn off air
inlet valve .
FIG.1
Notice: Under a working condition without air source. Please pump with vacuum air before use.
2) Extraction
1. Ensure the oil tank is under negative pressure, FIG.2 remove engine oil case., choose suitable probe
(which is the largest diameter one can be inserted into the engine) and tightly connect it to the extraction
pipe connector. Insert the end of the probe into the engine oil inlet hole, FIG.4 Turn on the ball
valve(Part No.32HC-1703) for oil extraction.
