RDM0012 Issue 1 AA
Page 4 of 35 © Protec Fire Detection PLC 2017
1.0
Introduction
The 6000/LOOP/REPEATER is a low power Fire Alarm Repeat Display, designed to complement Protec’s
range of control panels. Events from the panel are displayed on the device’s LCD, providing system
indication to any loop connected location on a site. The device only requires a loop connection to
provide both power and data, no network cabling, or external power supply is required.
2.0
Glossary of Terms
GUI
Graphical User Interface, graphics displayed on the screen of the device for user interaction.
Device
Refers to the 6000/LOOP/REPEATER.
Protec
Refers to Protec Fire Detection PLC.
There are no user serviceable parts inside the 6000/LOOP/REPEATER.
This equipment has been manufactured in conformance with the requirements of all
applicable EU council directives and regulations.
Electrical or electronic devices that are no longer serviceable must be collected separately
and sent for environmentally compatible recycling (in accordance with the European
Waste Electrical and Electronic Equipment Directive). To dispose of old electrical or
electronic devices, you should use the return and collection systems put in place in the
country concerned.
The policy of Protec Fire Detection PLC is one of continuous improvement. As such we reserve the
right to make changes to product specifications at any time and without prior notice.
